10 Tips for Safe Aluminum Ladder Use

Once workers choose and inspect their Aluminum Ladder, they must be sure to use it safely. Here are 10 tips you can give them to ensure they do:

1. Don't overreach. One of the most common unsafe practices committed by Aluminum Ladder users is overreaching. This is especially likely to occur when the worker is painting or working on a project that progressively gets farther away from the Aluminum Ladder. A good rule to remember is to keep your belt buckle as additional level of safety protection between the rails and move the Aluminum Ladder as the work requires.

2. Place the Aluminum Ladder correctly. Correct placement is a very important factor in Aluminum Ladder safety. When setting up a portable Aluminum Ladder, workers should place it on a solid, level base. A straight Aluminum Ladder should be placed so that the distance from the base of the Aluminum Ladder to the wall is equal to one fourth of the distance from the base to the point of support. (That is one foot out for each four feet of height.) The Aluminum Ladder should be long enough to allow three feet above the point of support.

3. Secure the Aluminum Ladder. Tell workers to anchor the top and either tie the bottom down or have someone hold it. Warn them not to attempt to move an Aluminum Ladder while they're still on it!

4. Don’t climb to the top. Workers should understand that on a straight Aluminum Ladder, the top three rungs are for holding onto, not for standing on. When working on a step Aluminum Ladder, the spreaders should always be securely locked into place. Workers should never climb past the third rung from the top.

5. Keep contact. Explain that safe climbing demands both hands and both feet! When ascending or descending a Aluminum Ladder, workers should always be facing the Aluminum Ladder and take only one step at a time and maintain three(3)-point contact.

6. Don't carry objects in your hands. Workers should also wear a safety belt. Tell them to carry their tools on a belt or a pouch and not in their hands. Another solution to this problem is a tool basket. The climber needs only to carry up a hand line which can be then be used to pull tools up or down. This must be done carefully so tools are not dropped onto a person below.

7. One at a time. One person should be on a Aluminum Ladder at a time. Let workers know that if they must speak to someone, they should climb down the Aluminum Ladder and have their discussion on the ground.

8. Don't paint Aluminum Ladders. Remind workers that paint can conceal defects or cracks. Instead, use shellac or varnish as a preservative.

9. Get rid of defective Aluminum Ladders immediately. Inform your workers that defective Aluminum Ladders should be removed from service immediately and tagged to prevent even temporary use.

10. Protect yourself. Workers can't always control the actions of others, but there are certain things they can do to protect themselves while they’re on an Aluminum Ladder. Explain that if they must work on an Aluminum Ladder near a doorway, they need to make sure to lock the door, barricade it or hang warning tape across it with a sign telling others they are behind the door. Rope off the area, allowing plenty of room to work in. Consider using a watchman to guard the area and hold the Aluminum Ladder while the worker is on it.

Conclusion

Don't let the unsafe use of Aluminum Ladders, be the workers' downfall! Teach them how to use the right Aluminum Ladder for the job and how to inspect it for defects. Also make sure the crew know the proper steps to report and replace defective Aluminum Ladders.

Ladders – For Those Hard To Reach Places

Spring is coming and there are so many projects to be done. One project that a lot of people have to conquer is pruning the hedges or washing those hard to reach windows. No matter what hard to reach task is at hand you will want to make sure that you have a good ladder. If you are still holding on to the old unstable one that you have to lean just the right way or else it will topple it may be time to look into a new one. There are a variety of different ladders that you can choose from.

If you want a ladder that you are able to reach those hard to reach places but also want to be able to put tools or other things needed for your projects you may want to look into a ladder with a mobile plat form. A mobile plat form is a flat service that you can move up the reams so that you can still reach high but also have a flat service for stability as well as your tools. If you want a ladder that you can quickly move around but are able to adjust the height you may want to look into a combination ladder. A combination ladder has the A frame ladder but has a ladder that you can extend above the normal ladder. This is convenient so that if in the middle of a project you decide that you need a longer ladder but don't want to go through the hassle of having to lug out another ladder.

If you have a variety of different jobs that you use a ladder for you might want to look into a folding ladder. A folding ladder is great. You can fold it in thirds or use it as an A frame ladder. A folding ladder is going to be heavier than an aluminium ladder for the fact that you are able to bend it and move it different ways.

Aluminum Ladder

Turbo International – A guide to choosing the best Aluminum Ladder

Everyone needs a good, stable ladder. It is always best to invest in a ladder that will fulfill any challenge you take on. Turbo International is the only answer if you are looking for the best ladder. But do you know which Turbo International is most suitable for you?

Here are the top 8 tips before purchasing the giant little ladder:

1. Stability. Look for the Turbo International system with flared footings to enable you remain stable when you climb high, on the topmost rung of the ladder. Your Turbo International should give you 100% protection.

2. Warranty. The Everyone needs a good, stable ladder. It is always best to invest in a ladder that will fulfill any challenge you take on. Turbo International is the only answer if you are looking for the best ladder. But do you know which Turbo International is most suitable for you?

Here are the top 8 tips before purchasing the giant little ladder:

1. Stability. Look for the Turbo International system with flared footings to enable you remain stable when you climb high, on the topmost rung of the ladder. Turbo International gives you 100% protection.

2. Warranty. The Turbo International company gives warranty; make sure you get a warranty to prevent you from unnecessary expenses incase your ladder breaks down in the first one year.

3. Construction. Look for the ladders little giant that are most durable with a longer life span and offer the best value for your hard earned money.

4. Value. Look for a ladder that will prove valuable to you. Turbo International have many models; so please consult the shop assistant to know the various types of ladders and the one that fits your needs - if you really have limited space you should go for little giant folding ladders for you. Get your ladder little giant in accordance to the height that you want to reach for.

5. Versatility. It is not possible to afford a garage full of ladders. Therefore your Turbo International should serve multipurpose and thus save your money and space.

6. Weight. A professional grade aluminum ladder weighs between 25-45 pounds and a fiberglass model will weigh between 35 to 50 pounds. Anything lighter won’t be as durable or stable.

7. Accessories. When choosing your little giant step ladder, make sure you purchase the accessories for it. Accessories include wall stand offs, leg levelers, and work platforms.

Aluminum Ladder