Friday, June 12, 2009

All about Scaffolding and their safety measures

Scaffolding is a provisional framework inside a building to hold up construction and repair of buildings and structures. Scaffolding is one of the main necessities in any construction field. Let it be large structures or smaller homes, Scaffolding is a necessary part. In Australia and most of the Oceania nations, Scaffolding is done with Pipes while in Asian countries Bamboo is used.

Scaffolding works are enduring to certain safety compulsions and the bare minimum requirements are set out by the authorities. The primary elements of basic scaffolds are: - Ledgers, Standards and Transoms.

Standards are perpendicular tubes which are used to relocate the entire weight of the structure to the floor where the scaffold rests. These kinds of Scaffolds are also called uprights. Ledgers are flat poles used to connect between standards. Transoms are always kept in the way which makes the right angle with the ledgers. It is an ordinary practice to place main transoms next to the standards to grasp the standards in place and to supply extra support to the boards. Main transoms will be associated by transitional transoms to supply extra support to the boards over and above the scaffoldings.

Following are some safety measures to adhere to when using scaffolding:

When moving towers, care must always be taken to ensure that the tower will remain upright. Particular concern must be taken when moving the scaffolding tower over a rough surface, as this may cause it to fall. No equipment should be left on the scaffolding platform at the same time as you are moving it. If the equipment falls it could damage or harm someone standing beneath, and the weight of the equipment could also make the scaffolding less powerful.

The tower should always be tied to the building in dubious weather conditions. Acute concern should be taken when there are high winds, as this could cause the scaffolding to move and bend. If the tower is not tall enough for its purpose, rather erect a taller structure of scaffolding. Inserting boxes or a ladder or any heavy equipment on top of scaffolding to gain extra height is very dangerous.

When scaffolding is upright, be it for industrial use or residential, the size and shape of the building must be taken into deliberation. A trained contractor who specializes in scaffolding is always ideal, because they will be able to decide accurately what size of scaffolding. They will draw up a scaffolding construction and installation plan that is customized for your building necessities.

No comments:

Post a Comment